Coal Slurry Sawdust Saw Sand Dryer Equipment
Type: Industrial Rotary Drum Drying Equipment
Discharge Water Content: ≤ 6%
Processed Materials: Such as ore, slag, coal, metal powder, clay, kaolin, ore mud, phosphate slag, aluminum, plant red mud, food waste, slaughterhouse waste, Organic fertilizer.
Applications: Building materials, metallurgy, chemical industry, cement plant for drying of sand, sawdust, wood, shavings, chicken manure, iron ore, limestone slag, coal powder, slag, clay stone,etc
Features of Sand Dryer Machine for Coal, Slurry, Sawdust, Sand:
·A high degree of mechanization,large production capacity, continuous operation;
·Simple structure, excellent resistance, stores running smoothly through the cylinder, operating convenience;
·Fault less low power consumption and low maintenance costs;
·Applicable to a wide range of dry, product, good uniformity.
Advantages of Small Tumble Dryer:
1,Burner System
The heating system can be customized, such as natural gas burner, coal burner, electricity, etc. The first two (gas burner and coal burner) are most common.
2,Internal Fins
Internal fins are utilized inside the cylinder to repeatedly spade materials up and then make them scatter inside the machine. In this way, the material can fully contact the hot air to reach higher efficiency.
3,Reducer
For the rotary dryer, the reducer is adopted to keep relative stability of the whole system and meanwhile protect the motor.
| Type | Gradient(%) | Rotation speed(r/min) | Inlet air temprature(celsius) | Power(kw) | Capacity(t/h) | Weight(t) |
| Dia600*600 | 3-5 | 3-8 | <700 | 3 | 0.5-1.5 | 2.9 |
| Dia800*8000 | 3-5 | 3-8 | <700 | 4 | 0.8-2.0 | 3.5 |
| Dia800*10000 | 3-5 | 3-8 | <700 | 4 | 0.8-2.5 | 4.5 |
| Dia1000*10000 | 3-5 | 3-8 | <700 | 5.5 | 1.0-3.5 | 5.6 |
| Dia1200*12000 | 3-5 | 3-8 | <700 | 11 | 2-6 | 14.8 |
| Dia1500*12000 | 3-5 | 2-6 | <800 | 18.5 | 3.5-9 | 17.8 |
| Dia1800*18000 | 3-5 | 2-6 | <800 | 22 | 5-12 | 31 |
| Dia2000*18000 | 3-5 | 1.5-6 | <800 | 30 | 6-15 | 43 |
| Dia2200*18000 | 3-5 | 1.5-6 | <800 | 37 | 10-18 | 52 |
| Dia2400*20000 | 3-5 | 1.5-5 | <800 | 45 | 18-30 | 60 |
| Dia2800*20000 | 3-5 | 1.5-5 | <800 | 55 | 25-35 | 72 |
| Dia3000*20000 | 3-5 | 1.5-5 | <800 | 55 | 32-40 | 91 |
| Dia3000*2000 | 3-5 | 1.5-5 | <800 | 75 | 40-55 | 104.9 |
When the materials enter into the body from feeding device, it will be pushed back by the spire raising board. As the dryer is in an inclined position, the materials will be down to the lower end under the influence of gravity and rotation, but the raising board will be threw to the upper end for scattering. This process make the material well-distributed in the body, then ensure the heat exchanged by heat wind. After repeated cycle with this process, the moisture content can be dried.
| Pessoa de Contato : | Simon |
|---|
